CARBON BODY AXLE chromoly THREADS 9/16 X 20 MM BEARING 2 BALL BEARINGS, 1 COMPASS NEEDLE HEIGHT AXLE / SOLE 13 MM AXLE DISTANCE PEDAL / CRANK 53 MM MULTITENSOR 3 TYPES OF HARD; 12, 16 AND 20 CLEATS KEO GRIP GREY CLEATS ANGULAR FREEDOM 0 °, 4.5 ° OR 9 ° ACCORDING TO TYPE OF CLEAT (BLACK, GREY OR RED) EFFECTIVE: 224gr (the couple) BLACK COLOR ACCESSORIES A COUPLE OF CLEATS KEO GRIP GREY + VITAME (6 SCREWS 5 X 11 MM AND 6 WASHERS)Keo Blade 2 is the result of years of work by engineers LOOK aimed to optimize all the innovative concepts developed on Keo Blade Carbon. Keo Blade 2 is an even safer, more stable, lighter and more powerful pedal. Its design fully integrates the blade for better aerodynamics.ENGAGEMENT / RELEASE VERY SAFE Design Keo Blade 2, based on a carbon blade, allows a more rigid release and remove your foot from the pedal much faster under sganciatura .This makes the pedal very secure and allowed us to remove the voltage regulation. However to satisfy all cyclists, Keo Blade 2 is available in 3 different hardnesses: 12 version suitable for most cyclists, version 16 for runners who seek greater support and version 20 for those looking for maximum support. You can switch from one version to another by changing the blade with a special tool.AERODYNAMIC PROFILE Thanks to the full integration of carbon spring blade in the body of the pedal, Keo Blade 2 is the pedal with the most aerodynamic ever created. Moreover, the two channels on both sides of the body allow optimum air flow.WIDTH AND SURFACE SUPPORT MAXIMUM LOOK has optimized the contact between the cleat and the plate in sopraformata stainless steel in Keo Blade body 2 so as to have the maximum area reached unprecedented support. The cleat is always at the maximum contact with the pedal, with any pedaling angle adopted.CONSTANT CONTACT CLEATS AND STOPS FOR A BETTER STABILITY In order to improve the stability of the cleat block pedals, we have worked to ensure that the cleat is always in contact with the beat with any angle adopted pedaling.LIGHTWEIGHT: 110 G LOCK pEDAL CLEATS + = 144G the weight of the pedal has been further reduced compared to the previous version. This is possible thanks to a new choice of the line of the pin, thinner and therefore lighter and a gain on the pedal body material.HIGH RELIABILITY Particular attention was paid to reliability: high resistance body, the bearing surface of steel steel, oversized axle and double seal makes this pedal a product very safe and durable.line pin: For greater efficiency, the new line of the Keo Blade 2 pin reduces the support height using an oversized axle Chromoly. E consists of 2 ball bearings Miniature: 12 mm x 18 mm inner and outer 6 mm x 12 mm inner and outer bushing of a needle.LOOK axles are approved only after a rotation test of 2 million cycles 100 rpm with a load of 90 kg at the center of the pedal and an eccentric rotation (creating a shock at each rotation). This test is more stringent than the applicable standard: the EN14781. A double seal ensures a long service life of the bearings.